Phone: 1300 123 737

T8 versus T5 Fluorescent: A Brief Analysis

1. What do the alpha numeric codes T5 and T8 actually mean?
Much has been made of the differences between T5 technology and T8 technology. I think it is wise to begin by discussing what T5 and T8 actually indicate. The letter ‘T’ in the lighting industry stands for “tubular.” This makes sense when one considers that fluorescent tubes are in fact tubular. The number directly following the letter “T” indicates the thickness or diameter of that particular tube in eighths of an inch.
• T12 = twelve eighths of an inch in diameter or one and one-half inches thick
• T8 = eight eighths of an inch in diameter or one inch thick
• T5 = five eighths of an inch in diameter or five eighths of an inch thick

2. What have these alpha numeric codes come to mean?
As interest in energy saving technologies has grown and become popularized, these codes have come to designate levels of energy efficiency, instead of merely indicating lamp tube diameter.
Assumptions of Efficiency:
• T12 = old and inefficient
• T8 = higher efficiency
• T5 = highest efficiency
Although, these assumptions are generally true, it is important to look at the application and determine the cost benefit of T5 over T8 in order to determine if the increased efficiency of T5 justifies the substantial increase in initial and long term maintenance costs.

3. General Assumptions of Cost
T5 costs significantly more than T8 and does not outperform it by the same margin. In fact, in many applications, the performance differences are negligible. Furthermore, all lamps are equally weighted with an average life of 20 000 hours.
General Assumptions of Cost:
• T12 = lowest lamp, ballast and fixture cost
• T8 = approx. 20% more expensive than T12
• T5 = 3-4 times the cost of T8

4. Why is T5 the best and how does that apply?
There are several different factors that determine levels of efficiency. Quality of light measured in CRI (Colour Rendering Index), quantity of light measured in LPW (Lumens per Watt) and CU (Co-efficiency of utilization.) The numbers being used for CU are general for those used in the low level (12 feet and under) multi-residential environment so there can be fluctuations.
CRI levels: LPW levels: CU (Generally):
T12 = 62CRI T12 = 78LPW T12 = .46CU
T8 = 85CRI T8 = 92LPW T8 = .76CU
T5 = 85CRI T5 = 103LPW T5 = .90CU
Considering these general factors, it is obvious that T5 is the best. But, how much better? With all factors weighed equally, a general presumption can be made, that:
• a. T8 is 40% more efficient than T12.
• b. T5 is 51% more efficient than T12.
Yet, T5 in this environment is only 9% more efficient than T8. This would never justify the substantial increase in fixture, lamp and ballast costs.
Furthermore, if energy savings is an issue, you can often lower the light output by 9 or 10 percent in order to recover the efficiency without any real impact to the perceived light levels.

5. Weather Conditions and Long Term Performance
The standard 32 watt T8 and electronic ballast with a low temperature rating are proven performers in a wide array of extreme applications. The systems are tried, tested and true in parking garages, factories, extreme cold environments and the list goes on. T5’s don’t have the track record in extreme applications.
Furthermore, T8 lamps and ballasts are now commodity items and can be purchased at low costs. T5 is still a premium product, whose research and development costs haven’t even been fully realized, let alone the process to produce commoditized to create low cost, highly reliable, replacement parts.

6. Conclusion
The “bottom line” is that T5 is superior to T8 in that it creates more usable light. However, it is not a “game changing” technology in that its superiority renders T8 obsolete (as is the case with T12). Finally, the real game changer will be LED and organic LED technologies.
These technologies will render both T5 and T8 obsolete in the future. However, these technologies have not arrived as yet, and are not in the imminent horizon for fluorescent fixture applications. For the mean time, T8 and T5 will continue to be the reliable, energy efficient choice for a multitude of general applications. The astute lighting designer will specify based on individual project demands, not by an allegiance to one technology.

Comments are closed.

1300 123 737
Programmed Property Maintenance, 24/7 Service Contracts, Inter-tenancy Walls, Acoustic Services, Waterproofing, Concreting, Painting & Decorating, Custom Metal Fabrication, Custom Joinery & Cabinet Making, Electrical Services, Facade Repairs, Carpets Repair, Storage Rooms/Cages, OHS - Risk Works, Ceiling Grid Repairs, Rubbish Removal, Commercial Project, Tenancy Refurbishment, Strip out & Make Good, Foyer Refurbishment, Bathroom Refurbishment, Waterproofing Works, Plumbing, Office Fitouts